Serial windows server 2012 r2 datacenter x64 free.Comparison of Microsoft Windows versions

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Archived from the original on March 10, Archived from the original on November 16, Archived from the original on February 26, Archived from the original on October 6, Archived from the original on October 5, Microsoft Support. Archived from the original on December 10, Archived from the original on October 29, Retrieved February 5, Archived from the original on December 31, Windows Hardware Development.

May 11, Archived from the original on March 3, Archived from the original on February 10, Retrieved September 2, January Archived from the original on March 7, Archived from the original on June 27, Retrieved May 24, Archived from the original on August 21, Archived from the original on May 11, Archived from the original on May 5, Archived from the original on May 22, Wikibooks has a book on the topic of: Basic Computing Using Windows.

Microsoft Windows. Components History Timeline Criticism. Windows 1. Windows 95 Windows 98 Windows Me. Embedded Compact CE 5. Phone 7 Phone 8 Phone 8. Cairo Nashville Neptune Odyssey. List of versions Comparison Category. Categories : Microsoft Windows Operating system comparisons. Hidden categories: Pages using the EasyTimeline extension Articles needing additional references from August All articles needing additional references Articles with short description Short description is different from Wikidata All accuracy disputes Articles with disputed statements from August All articles lacking reliable references Articles lacking reliable references from August All articles with unsourced statements Articles with unsourced statements from November Namespaces Article Talk.

Views Read Edit View history. Help Learn to edit Community portal Recent changes Upload file. Download as PDF Printable version. Janus 3. Windows 3. Unsupported [1]. Workstation , Server. IA , IA , x Windows Server Windows Server R2.

Windows Fundamentals for Legacy PCs. Windows Home Server. Windows Home Server IA , x , ARMv7. Windows 8. To configure an option, you must uncomment that option and restart the watchdog service after saving the changes. For a more detailed explanation of options for configuring the watchdog service and using the watchdog command, see the watchdog man page.

An IP address that the watchdog attempts to ping to verify whether that address is reachable. You can specify multiple IP addresses by adding additional ping lines. A network interface that the watchdog will monitor to verify the presence of network traffic. You can specify multiple network interfaces by adding additional interface lines. A file on the local system that the watchdog will monitor for changes.

You can specify multiple files by adding additional file lines. The number of watchdog intervals after which the watchdog checks for changes to files.

A change line must be specified on the line directly after each file line, and applies to the file line directly above that change line. The maximum average load that the virtual machine can sustain over a one-minute period. If this average is exceeded, then the watchdog is triggered. A value of 0 disables this feature.

The maximum average load that the virtual machine can sustain over a five-minute period. By default, the value of this variable is set to a value approximately three quarters that of max-load The maximum average load that the virtual machine can sustain over a fifteen-minute period. By default, the value of this variable is set to a value approximately one half that of max-load The minimum amount of virtual memory that must remain free on the virtual machine.

This value is measured in pages. The path and file name of a binary file on the local system that will be run when the watchdog is triggered. If the specified file resolves the issues preventing the watchdog from resetting the watchdog counter, then the watchdog action is not triggered. The path and file name of a binary file on the local system that the watchdog will attempt to run during each interval. A test binary allows you to specify a file for running user-defined tests.

The time limit, in seconds, for which user-defined tests can run. A value of 0 allows user-defined tests to continue for an unlimited duration. The path to and name of a device for checking the temperature of the machine on which the watchdog service is running. The maximum allowed temperature for the machine on which the watchdog service is running. The machine will be halted if this temperature is reached. Unit conversion is not taken into account, so you must specify a value that matches the watchdog card being used.

The interval, in seconds, between updates to the watchdog device. The watchdog device expects an update at least once every minute, and if there are no updates over a one-minute period, then the watchdog is triggered. This one-minute period is hard-coded into the drivers for the watchdog device, and cannot be configured. When verbose logging is enabled for the watchdog service, the watchdog service periodically writes log messages to the local system.

The logtick value represents the number of watchdog intervals after which a message is written. Specifies whether the watchdog is locked in memory. A value of yes locks the watchdog in memory so that it is not swapped out of memory, while a value of no allows the watchdog to be swapped out of memory. If the watchdog is swapped out of memory and is not swapped back in before the watchdog counter reaches zero, then the watchdog is triggered. The schedule priority when the value of realtime is set to yes.

The path and file name of a PID file that the watchdog monitors to see if the corresponding process is still active.

If the corresponding process is not active, then the watchdog is triggered. As a result, the resources backing a large virtual machine that cannot fit within a single host socket could be spread out across multiple NUMA nodes. Over time these resources may be moved around, leading to poor and unpredictable performance. Configure and pin virtual NUMA nodes to avoid this outcome and improve performance.

To confirm whether NUMA is enabled on a host, log in to the host and run numactl –hardware. The output of this command should show at least two NUMA nodes. This button is only available when the selected host has at least two NUMA nodes.

Select the Specific Host s radio button and select the host s from the list. The selected host s must have at least two NUMA nodes. In the Administration Portal, you can configure a virtual machine to display the available errata.

The virtual machine needs to be associated with a Red Hat Satellite server to show available errata. The Engine and any virtual machines on which you want to view errata must all be registered in the Satellite server by their respective FQDNs.

This ensures that external content host IDs do not need to be maintained in oVirt. The host that the virtual machine runs on also needs to be configured to receive errata information from Satellite. The virtual machine must have the ovirt-guest-agent package installed. This package enables the virtual machine to report its host name to the oVirt Engine, which enables the Red Hat Satellite server to identify the virtual machine as a content host and report the applicable errata.

The Katello agent is deprecated and will be removed in a future Satellite version. Migrate your processes to use the remote execution feature to update clients remotely.

Setting up Satellite errata viewing for a host in the Administration Guide. You can configure a headless virtual machine when it is not necessary to access the machine via a graphical console. This headless machine will run without graphical and video devices. This can be useful in situations where the host has limited resources, or to comply with virtual machine usage requirements such as real-time virtual machines.

Headless virtual machines can be administered via a Serial Console, SSH, or any other service for command line access. Headless mode is applied via the Console tab when creating or editing virtual machines and machine pools, and when editing templates.

It is also available when creating or editing instance types. If you are creating a new headless virtual machine, you can use the Run Once window to access the virtual machine via a graphical console for the first run only.

To set console mode, comment out the spashimage flag in the GRUB menu configuration file:. Restart the virtual machine if it is running when selecting the Headless Mode option. Select Headless Mode. All other fields in the Graphical Console section are disabled. Optionally, select Enable VirtIO serial console to enable communicating with the virtual machine via serial console. This is highly recommended.

Reboot the virtual machine if it is running. See Rebooting a Virtual Machine. You can configure a virtual machine for high performance, so that it runs with performance metrics as close to bare metal as possible. When you choose high performance optimization, the virtual machine is configured with a set of automatic, and recommended manual, settings for maximum efficiency.

The high performance option is only accessible in the Administration Portal, by selecting High Performance from the Optimized for dropdown list in the Edit or New virtual machine, template, or pool window. This option is not available in the VM Portal. The high performance option is supported by oVirt 4.

It is not available for earlier versions. If you change the optimization mode of a running virtual machine to high performance, some configuration changes require restarting the virtual machine. To change the optimization mode of a new or existing virtual machine to high performance, you may need to make manual changes to the cluster and to the pinned host configuration first. A high performance virtual machine has certain limitations, because enhanced performance has a trade-off in decreased flexibility:.

High performance templates and pools are created and edited in the same way as virtual machines. If a high performance template or pool is used to create new virtual machines, those virtual machines inherits this property and its configurations.

Certain settings, however, are not inherited and must be set manually:. Selecting this option automatically performs certain configuration changes to this virtual machine, which you can view by clicking different tabs. You can change them back to their original settings or override them. If you change a setting, its latest value is saved. See Configuring the Recommended Manual Settings for details. Alternatively, click OK to ignore the recommendations. The result may be a drop in the level of performance.

You can view the optimization type in the General tab of the details view of the virtual machine, pool, or template.

Certain configurations can override the high performance settings. For example, if you select an instance type for a virtual machine before selecting High Performance from the Optimized for drop-down menu and performing the manual configuration, the instance type configuration will not affect the high performance configuration.

If, however, you select the instance type after the high performance configurations, you should verify the final configuration in the different tabs to ensure that the high performance configurations have not been overridden by the instance type. The following table summarizes the automatic settings. The Applies to column indicates the relevant resources:. Highly Available is not automatically enabled. If you select it manually, high availability should be enabled for pinned hosts only.

Otherwise, a warning will appear in the engine log. The following icons indicate the states of a high performance virtual machine in the Compute Virtual Machines screen.

You can configure the recommended manual settings in either the New or the Edit windows. The following table summarizes the recommended manual settings. See Virtual Machine Resource Allocation settings explained for information about the syntax of this field. CPU-intensive workloads perform best when the host and virtual machine expect the same cache usage. CPU pinning can only be set for virtual machines and pools, but not for templates. Therefore, you must set CPU pinning manually whenever you create a high performance virtual machine or pool, even if they are based on a high performance template.

In the Host tab, select the Specific Host s radio button and select the host s from the list. The IO and emulator threads pinning topology. NUMA pinning can only be set for virtual machines, not for pools or templates. You must set NUMA pinning manually when you create a high performance virtual machine based on a template. Huge pages are pre-allocated when a virtual machine starts to run dynamic allocation is disabled by default.

You should set the huge page size to the largest size supported by the pinned host. Requires a kernel command line in the Edit Host configuration in the Administraion Portal. See Custom kernel command line. Click Compute Clusters and select the cluster. It features mappings that are valid for Windows and non-Windows time zones. Do not edit the actual timezone. For example, timezone. Add new time zones to that file. Be sure each key is a valid General time zone from the time zone database and the value is a valid Windows time zone:.

Changes to storage, operating system, or networking parameters can adversely affect the virtual machine. Ensure that you have the correct details before attempting to make any changes. Virtual machines can be edited while running, and some changes listed in the procedure below will be applied immediately. To apply all other changes, the virtual machine must be shut down and restarted.

External virtual machines marked with the prefix external cannot be edited through the oVirt Engine. Memory Size Edit this field to hot plug virtual memory. See Hot Plugging Virtual Memory. See CPU hot plug. Some changes are applied immediately.

All other changes are applied when you shut down and restart your virtual machine. Until then, the pending changes icon appears as a reminder to restart the virtual machine.

You can add multiple network interfaces to virtual machines. Doing so allows you to put your virtual machine on multiple logical networks. You can create an overlay network for your virtual machines, isolated from the hosts, by defining a logical network that is not attached to the physical interfaces of the host. For example, you can create a DMZ environment, in which the virtual machines communicate among themselves over the bridge created in the host.

The overlay network uses OVN, which must be installed as an external network provider. See the Administration Guide for more information.

Select the Profile and the Type of network interface from the drop-down lists. The Profile and Type drop-down lists are populated in accordance with the profiles and network types available to the cluster and the network interface cards available to the virtual machine. The new network interface is listed in the Network Interfaces tab in the details view of the virtual machine. The Link State is set to Up by default when the network interface card is defined on the virtual machine and connected to the network.

In order to change any network settings, you must edit the network interface. This procedure can be performed on virtual machines that are running, but some actions can be performed only on virtual machines that are not running. Change settings as required. See Adding a Network Interface. You can hot plug network interfaces. Hot plugging means enabling and disabling devices while a virtual machine is running.

Set the Card Status to Plugged to enable the network interface, or set it to Unplugged to disable the network interface. You can configure the ovirt-guest-agent on a virtual machine to ignore certain NICs. This prevents IP addresses associated with network interfaces created by certain software from appearing in reports. You must specify the name and number of the network interface you want to ignore for example, eth0 , docker0.

See Creating a template from an existing virtual machine for details. Image is the default type of disk. You can also add a Direct LUN disk. Image disk creation is managed entirely by the Engine. Direct LUN disks require externally prepared targets that already exist. Existing disks are either floating disks or shareable disks attached to virtual machines.

Use the drop-down lists and check boxes to configure the disk. See Add Virtual Disk dialogue entries for more details on the fields for all disk types. Floating disks can minimize the amount of time required to set up virtual machines.

Floating disks can be attached to a single virtual machine, or to multiple virtual machines if the disk is shareable. Each virtual machine that uses the shared disk can use a different disk interface type. Select one or more virtual disks from the list of available disks and select the required interface from the Interface drop-down. No Quota resources are consumed by attaching virtual disks to, or detaching virtual disks from, virtual machines.

You can extend the available size of a virtual disk while the virtual disk is attached to a virtual machine. Resizing a virtual disk does not resize the underlying partitions or file systems on that virtual disk. Use the fdisk utility to resize the partitions and file systems as required. See How to Resize a Partition using fdisk for more information. When the resizing of the drive is complete, the status of the drive becomes OK. You can hot plug virtual disks.

Hot plugging means enabling or disabling devices while a virtual machine is running. Click More Actions , then click Activate to enable the disk, or Deactivate to disable the disk. Click More Actions , then click Deactivate. Optionally, select the Remove Permanently check box to completely remove the virtual disk from the environment. If you do not select this option – for example, because the disk is a shared disk – the virtual disk will remain in Storage Disks. If the disk was created as block storage, for example iSCSI, and the Wipe After Delete check box was selected when creating the disk, you can view the log file on the host to confirm that the data has been wiped after permanently removing the disk.

If the disk was created as block storage, for example iSCSI, and the Discard After Delete check box was selected on the storage domain before the disk was removed, a blkdiscard command is called on the logical volume when it is removed and the underlying storage is notified that the blocks are free. A blkdiscard is also called on the logical volume when a virtual disk is removed if the virtual disk is attached to at least one virtual machine with the Enable Discard check box selected.

Click Storage Domains. Select one or more disk images and click Import. This opens the Import Disk s window. You can import floating virtual disks from a storage domain. Floating disks created outside of a oVirt environment are not registered with the Engine. Scan the storage domain to identify unregistered floating disks to be imported. You can hot plug virtual memory. Each time memory is hot plugged, it appears as a new memory device in the Vm Devices tab in the details view of the virtual machine, up to a maximum of 16 available slots.

If the hot plug fails for example, if there are no more available slots , the memory increase will be applied when the virtual machine is restarted. If you might need to later hot unplug the memory that you are now hot plugging, see Hot Unplugging Virtual Memory. Increase the Memory Size by entering the total amount required.

Memory can be added in multiples of MB. By default, the maximum memory allowed for the virtual machine is set to 4x the memory size specified. Though the value is changed in the user interface, the maximum value is not hot plugged, and you will see the pending changes icon. To avoid that, you can change the maximum memory back to the original value. This action opens the Pending Virtual Machine changes window, as some values such as maxMemorySizeMb and minAllocatedMem will not change until the virtual machine is restarted.

However, the hot plug action is triggered by the change to the Memory Size value, which can be applied immediately. You can see the newly added memory device in the Vm Devices tab in the details view. You can hot unplug virtual memory. Hot unplugging disables devices while a virtual machine is running. The virtual machine must not have a memory balloon device enabled. This feature is disabled by default. In virtual machines running up-to-date versions of Enterprise Linux or CoreOS, this rule is set by default.

For more information, see Setting kernel command-line parameters in the RHEL 8 document Managing, monitoring and updating the kernel. In the Hot Unplug column, click Hot Unplug beside the memory device to be removed. The Physical Memory Guaranteed value for the virtual machine is decremented automatically if necessary. You can hot plug vCPUs. See the table below for support details. Windows virtual machines must have the guest agents installed. Virtual machines can be pinned to multiple hosts.

Multi-host pinning allows a virtual machine to run on a specific subset of hosts within a cluster, instead of one specific host or all hosts in the cluster. The virtual machine cannot run on any other hosts in the cluster even if all of the specified hosts are unavailable.

Multi-host pinning can be used to limit virtual machines to hosts with, for example, the same physical hardware configuration. If a host fails, a highly available virtual machine is automatically restarted on one of the other hosts to which the virtual machine is pinned.

Select the Specific Host s radio button under Start Running On and select two or more hosts from the list. Select Low , Medium , or High from the Priority drop-down list. When migration is triggered, a queue is created in which the high priority virtual machines are migrated first.

If a cluster is running low on resources, only the high priority virtual machines are migrated. You can view virtual machines pinned to a host even while the virtual machines are offline. Use the Pinned to Host list to see which virtual machines will be affected and which virtual machines will require a manual restart after the host becomes active again. Click Compute Hosts. Procedure from the list to eject the CD currently accessible to the virtual machine. Smart cards are an external hardware security feature, most commonly seen in credit cards, but also used by many businesses as authentication tokens.

Smart cards can be used to protect oVirt virtual machines. Click the Console tab and select the Smartcard enabled check box. Connect to the running virtual machine by clicking the Console button. Smart card authentication is now passed from the client hardware to the virtual machine. If the Smart card hardware is not correctly installed, enabling the Smart card feature will result in the virtual machine failing to load properly. Click the Console tab, and clear the Smartcard enabled check box.

Smart cards may require certain libraries in order to access their certificates. These libraries must be visible to the NSS library, which spice-gtk uses to provide the smart card to the guest. For instance, if you have only the 32b PKCS 11 library available, you must install the 32b build of virt-viewer in order for smart cards to work. Enterprise Linux provides support for Smart cards. Install the Smart card support group. If the Smart Card Support group is installed on a Enterprise Linux system, smart cards are redirected to the guest when Smart Cards are enabled.

Enterprise Linux provides a system-wide registry of pkcs11 modules in the pkit , and these are accessible to all applications. To register the third party PKCS 11 library in the pkit database, run the following command as root:. Libraries that provide PKCS 11 support must be obtained from third parties. When such libraries are obtained, register them by running the following command as a user with elevated privileges:. You can turn off a virtual machine using Shutdown or Power Off. Shutdown gracefully shuts down a virtual machine.

Power Off executes a hard shutdown. A graceful shutdown is usually preferable to a hard shutdown. If an exclamation point appears next to the virtual machine, a snapshot deletion process has failed, and you may not be able to restart the machine after shutting it down. Try to delete the snapshot again and ensure that the explanation mark disappears before shutting down the virtual machine.

See Deleting a snapshot for more information. Click Shutdown or right-click the virtual machine and select Shutdown from the pop-up menu. Optionally in the Administration Portal, enter a Reason for shutting down the virtual machine in the Shut down Virtual Machine s confirmation window. This allows you to provide an explanation for the shutdown, which will appear in the logs and when the virtual machine is powered on again.

The virtual machine shutdown Reason field will only appear if it has been enabled in the cluster settings. If the virtual machine gracefully shuts down, the Status of the virtual machine changes to Down. If the virtual machine does not gracefully shut down, click the down arrow next to Shutdown and then click Power Off to execute a hard shutdown, or right-click the virtual machine and select Power Off from the pop-up menu.

Suspending a virtual machine is equal to placing that virtual machine into Hibernate mode. Click Suspend or right-click the virtual machine and select Suspend from the pop-up menu. Several situations can occur where you need to reboot the virtual machine, such as after an update or configuration change. If a guest operating system can not be loaded or has become unresponsive, you need to reset the virtual machine. Click Reboot or right-click the virtual machine and select Reboot from the pop-up menu.

Click the down arrow next to Reboot , then click Reset , or right-click the virtual machine and select Reset from the pop-up menu. During reboot and reset operations, the Status of the virtual machine changes to Reboot In Progress before returning to Up. The Remove button is disabled while virtual machines are running; you must shut down a virtual machine before you can remove it. Click Compute Virtual Machines and select the virtual machine to remove.

Optionally, select the Remove Disk s check box to remove the virtual disks attached to the virtual machine together with the virtual machine. If the Remove Disk s check box is cleared, then the virtual disks remain in the environment as floating disks. The Clone VM button is disabled while virtual machines are running; you must shut down a virtual machine before you can clone it. Click Compute Virtual Machines and select the virtual machine to clone. The guest tools are distributed as an ISO file that you can attach to virtual machines.

Update the guest agents and drivers on your Enterprise Linux virtual machines to use the latest version. When you need to update the drivers for a Windows virtual machine, the simplest method is to use Windows Update. Updating Windows guest agents and drivers using the command prompt.

During this procedure, you must remove and reinstall the drivers, which can lead to network disruption. This procedure restores your settings after reinstalling the drivers. If you are updating the drivers, on the Windows virtual machine, use the netsh utility to save TCP settings before uninstalling the netkvm driver:. Upload the ISO file to a data domain. To install the guest agents and drivers, or just the drivers, use virtio-win-gt-x Errata for each virtual machine can be viewed after the oVirt virtual machine has been configured to receive errata information from the Red Hat Satellite server.

For more information on configuring a virtual machine to display available errata see Configuring Satellite Errata. As the SuperUser , the system administrator manages all aspects of the Administration Portal. More specific administrative roles can be assigned to other users. These restricted administrator roles are useful for granting a user administrative privileges that limit them to a specific resource.

For example, a DataCenterAdmin role has administrator privileges only for the assigned data center with the exception of the storage for that data center, and a ClusterAdmin has administrator privileges only for the assigned cluster.

A UserVmManager is a system administration role for virtual machines in a data center. This role can be applied to specific virtual machines, to a data center, or to the whole virtualized environment; this is useful to allow different users to manage certain virtual resources.

Many end users are concerned solely with the virtual machine resources of the virtualized environment. As a result, oVirt provides several user roles which enable the user to manage virtual machines specifically, but not other resources in the data center.

The table below describes the administrator roles and privileges applicable to virtual machine administration. Possesses administrative permissions for all objects underneath a specific data center except for storage.

Possesses administrative permissions for all objects underneath a specific cluster. Possesses administrative permissions for all operations on a specific logical network. Can configure and manage networks attached to virtual machines. To configure port mirroring on a virtual machine network, apply the NetworkAdmin role on the network and the UserVmManager role on the virtual machine.

The table below describes the user roles and privileges applicable to virtual machine users. These roles allow access to the VM Portal for managing and accessing virtual machines, but they do not confer any permissions for the Administration Portal. Apply this role to a user for the whole environment with the Configure window, or for specific data centers or clusters.

For example, if a PowerUserRole is applied on a data center level, the PowerUser can create virtual machines and templates in the data center. Can manage virtual machines and create and use snapshots. A user who creates a virtual machine in the VM Portal is automatically assigned the UserVmManager role on the machine. This role is not applied to a specific virtual machine; apply this role to a user for the whole environment with the Configure window.

When applying this role to a cluster, you must also apply the DiskCreator role on an entire data center, or on specific storage domains. If the Allow all users to use this Network option was selected when a logical network is created, VnicProfileUser permissions are assigned to all users for the logical network.

Users can then attach or detach virtual machine network interfaces to or from the logical network. If you are creating virtual machines for users other than yourself, you have to assign roles to the users before they can use the virtual machines.

Note that permissions can only be assigned to existing users. See Users and Roles in the Administration Guide for details on creating user accounts. However, customized roles can be configured via the Administration Portal. The default roles are described below. A User can connect to and use virtual machines. This role is suitable for desktop end users performing day-to-day tasks.

A PowerUser can create virtual machines and view virtual resources. This role is suitable if you are an administrator or manager who needs to provide virtual resources for your employees. A UserVmManager can edit and remove virtual machines, assign user permissions, use snapshots and use templates. It is suitable if you need to make configuration changes to your virtual environment. When you create a virtual machine, you automatically inherit UserVmManager privileges.

This enables you to make changes to the virtual machine and assign permissions to the users you manage, or users who are in your Identity Management IdM or RHDS group.

Enter a name, or user name, or part thereof in the Search text box, and click Go. A list of possible matches display in the results list.

If a user is assigned permissions to only one virtual machine, single sign-on SSO can be configured for the virtual machine.

With single sign-on enabled, when a user logs in to the VM Portal, and then connects to a virtual machine through, for example, a SPICE console, users are automatically logged in to the virtual machine and do not need to type in the user name and password again.

Single sign-on can be enabled or disabled on a per virtual machine basis. See Configuring Single Sign-On for Virtual Machines for more information on how to enable and disable single sign-on for virtual machines.

Click Remove. A warning message displays, asking you to confirm removal of the selected permissions. Take a snapshot of a virtual machine before you make a change to it that may have unintended consequences. You can use a snapshot to return a virtual machine to a previous state.

If no disks are selected, a partial snapshot of the virtual machine, without a disk, is created. You can preview this snapshot to view the configuration of the virtual machine.

Note that committing a partial snapshot will result in a virtual machine without a disk. The snapshot is created with a status of Locked , which changes to Ok. When you click the snapshot, its details are shown on the General , Disks , Network Interfaces , and Installed Applications drop-down views in the Snapshots tab.

Click the Preview drop-down menu button and select Custom. This allows you to create and restore from a customized snapshot using the configuration and disk s from multiple snapshots. The status of the snapshot changes to Preview Mode. The status of the virtual machine briefly changes to Image Locked before returning to Down. Click Commit to permanently restore the virtual machine to the condition of the snapshot.

Any subsequent snapshots are erased. The hardware is often integrated on the motherboard of the server, and the combined product is termed iDRAC, where the “i” is for integrated. When iDRAC Express is used, the software and hardware systems management functions are shared with one of the server’s on-board network interfaces using a unique IP address.

An overview of the different versions: [3]. With the DRAC enabled and using its own separate network connection, a user may login and reboot the system even if the core operating system has crashed. If the operating system has loaded the correct drivers, the DRAC will attempt to shut down the system gracefully.

Without this feature and with the system running, administrators can use the remote console to access the operating system too. The remote console features of the DRAC allow an administrator to interface with the computer as if sitting in front of it, and one can share the local inputs from keyboard and mouse as well as video output DRAC does not support remote sound.

Remote-console capability relies on either an Active X or Java plug-in , or HTML5 in the later models, which displays a window showing the video output on the local terminal and which takes mouse and keyboard input. It is used to take the server console remotely. The DRAC enables a user to mount remotely shared disk-images as if they were connected to the system. In combination with the remote console, this gives administrators the ability to completely re-install an operating system , a task which traditionally required local console access to the physical machine.

Administrators can control virtual media through the browser or through the OpenManage tools provided by Dell, though specific versions of browsers restrict some functionality.

The main DRAC management takes place via a web interface. All generations of the DRAC use the default user name root and the default password calvin. The firmware source code is available on the Dell website, [18] but it is not possible to compile the source into a replacement firmware as Dell does not include a build environment.

This is done by configuring the system BIOS to send its output to a serial port as a stream of text using VTcompatible control codes. The chosen serial port is then redirected to the DRAC’s serial port.

 
 

 

Untitled — Windows Server R2 X64 Serial Key

 

Yes No. Thank you. Your feedback has been received. Dedicated servers Changing the admin password on a Windows dedicated server. Dedicated servers Changing the root password on a dedicated server.

Most viewed tutorials. IP Management. Customer data protection. Instance management. Managing dedicated servers. VPS management. Managing Hosted Private Cloud. OVHcloud Community Access your community space. Discuss with the OVHcloud community. Support Help centre Guides Community Support levels. News Press Blog Ecosystem Experience.

If you leave a review through your personal account , which will have created automatically after purchasing the product, then on the site in the reviews it is displayed on behalf of “Anonym”. When writing a review directly from the product page in the field below – the items “Name” and “E-mail” are mandatory, your Email is not publicly published , we need it only for feedback.

Manufacturer : Microsoft Corporation. Store Reviews Discounts Product Reviews. Dear visitors, to contact the store administration, you can use the contact form in the lower right corner of the window. And also, if you have purchased your product and activated the key, please leave a comment, it helps the development of the store. Thank you for using our services!

 
 

– Serial windows server 2012 r2 datacenter x64 free

 
 
They are blocked at the Microsoft clearinghouse and therefore cannot be used to Windows Server R2 Datacenter, W3GGN-FT8W3-Y4MJ84CP-Q3VJ9. Install the new product key ; Windows Server R2 Standard, D2N9P-3P6XR39C-7RTCD-MDVJX ; Windows Server R2 Datacenter, W3GGN-FT8W You can download Windows Server r2, which has already become a classic, Version: r2 Standard and Datacenter System bit: x